“Swish!”

“Swish!”

“What’s that sound?” I kept fishing, pretending not to notice the conversation in the back of the boat. Hank DiNardo had been nice enough to invite me out on his Southport 28TE to fish Eastern Bay. I hadn’t fished with Hank before and he wasn’t familiar with my quick-snap style of jigging. The fish finder told us there was fish around the boat, but they weren’t biting. I was up on the bow using every strike trigger I knew, including snapping my jig for all I was worth.

From the back I heard my regular fishing partner, Jamie Clough explaining, “That’s just the way Kimbro jigs sometimes.”

Indeed. That was seven years ago and since then I’ve earned something of a reputation for my energetic, somewhat spastic jigging style. When fishing is tough, you’ll frequently hear my rod tip cutting through the air as I snap my soft plastic jigs off the bottom. It’s a technique that’s been both mocked and revered with the biggest detractors being a couple of local guys who thought they already had it all figured out and the strongest proponents being newcomers to the Chesapeake Bay light tackle game who just want to catch more fish.

Why snap jigging? Read More!

Lights! Action! Intensity! Get those video camera’s rolling. It’s time for adrenaline pumping surface action along the rocky shorelines and the grassy points of the Chesapeake Bay. The top-water bite is on! I’ve written a lot about where and when to cast top-water lures, but I haven’t said too much about choosing a good fishing rod for surface feeding stripers. Let’s fix that. Here are six tips for choosing the right top-water rod.

1. Spin It To Win It – Since it’s often windy on the Bay and surface lures are light and not very aerodynamic, I prefer a spinning outfit for top-water casting. There’s a trade off because casting rods are more accurate, but there’s nothing more frustrating than having to stop to pick out a backlash, especially while you’re drifting quickly past fish-holding cover. If need be, you can increase your accuracy with a spinning outfit by adding micro-guides, but standard guides work fine. Reduce your margin for error and go with the sissy stick. Read More!

When it comes to selecting a rod, light tackle fishermen are rightfully very picky. Most of us get very specific about what we like. You’ll find several websites that have great information about choosing a multi-purpose fishing rod, but I don’t know of many that focus specifically on the best rods for casting lures on the Chesapeake Bay. There is always an element of personal choice when it comes to rod selection, and less experienced anglers should use basic and less-expensive equipment, but if you’re serious about the light tackle game, here are six things (and maybe a few more) you need to know:

1. Baitcasting Benefits  – Once you see a baitcaster used effectively for catching stripers, you’ll never go back to a spinning outfit. Baitcasters are appropriate for most jigging situations in the Chesapeake Bay. Wind and current can make a boat drift rapidly across a good jigging spot. As you drift across and away from the fish, your lure will be pulled up, over and above the strike zone. With a baitcaster, you simply press the thumb bar to let your lure fall back down to the proper depth. Unlike with a spinning reel, you don’t have to cast again. Keep in mind that, through most of the year, the bigger stripers are usually close to the bottom, so you increase your chances of catching them by keeping the lure where they are. Here’s a link to a  video I shot in July a few years ago at the Bay Bridge. It shows some useful baitcasting techniques and includes some shots of resetting a lure into the strike zone.  https://www.youtube.com/watch?v=sH_3rC0sZ-Y

Read More!

You don’t need expensive equipment to catch striped bass, you just need the right equipment.

One of the most frequently asked questions I hear from fishermen who want to get into the light tackle striper game is, “How do I know what kind of rod to buy.” It’s a simple question, but my usual answer is, “It depends.”

One of the biggest mistakes a beginning angler can make is spending hundreds of unnecessary dollars on overly advanced equipment. A G-Loomis rod with a Stella reel may make you look good as you’re walking down the dock, but it won’t put fish in the boat if it isn’t designed for the way you intend to fish. I fished for thirty-five years before I ever spent more than a hundred dollars on a rod. Did it improve my fishing? Yes, but in very small increments over a long period of time.

The wrong kind of rod can make it much more difficult to catch fish and lengthen the learning curve for catching striped bass. Before you buy an expensive rod you should know exactly what you want for the kind of fishing you plan to do. This is best learned by trial and error with less expensive, mid-level equipment. The phrase “you get what you pay for” is applicable, but there are some very respectable rods in the forty to sixty dollar range. I would never suggest a very cheap rod for anyone who is seriously considering light tackle striper fishing.

Although it probably seems like there are unlimited choices, there are basically three variables to consider when selecting a rod. They are length, action (also called speed or taper), and power. Each aspect is important when applied to specific techniques and can make a big difference in your fishing success.

Length

Other than surf and fly rods, the most common rod lengths used for light tackle striper applications are between six and seven feet. The longer the rod, the farther you can cast. A short rod gives you more strength and maneuverability. Shorter rods usually have less action making it easier to muscle the fish to the boat, while a longer rod will provide more play and can add to the action of your lures. Many good fishermen feel a shorter rod is more sensitive because there is less distance for the strike to travel before it is transmitted to the hands. My favorite rods incorporate the best of both worlds and are six foot six inches to six foot eight inches long.

The length of the handle or butt is another important aspect. This is the part of the rod between the reel and the very back end of the rod. Spinning rods usually have longer butts than casting rods, but many fishermen who use baitcasters now prefer long handles. A longer butt can increase leverage and lengthen casts. It’s also helpful when you’re fighting a big fish because you can brace the butt against your chest or stomach for added leverage. I have recently been lobbying some rod makers to put longer butts on their casting rods for light tackle salt-water applications.

Action (speed or taper)

The action or speed of a rod refers to the taper of the graphite or fiberglass. The degree of taper is directly related to flexibility and how much the rod bends. It’s referred to in terms of speed because it’s how fast the rod snaps back when bent. Stiffer rods snap back faster than limber ones. Rod manufacturers define action in 4 categories: slow, medium, fast, and extra fast. Sometimes you hear taper referred to as “back-bone.” A rod that is stiffer with less flex down near the reel is said to have more back-bone.

Slow action means the rod will bend from one end to the other. They are usually hard to cast and make setting the hook difficult, but they can be useful for adding action to lures. The only time I use slow action is on an ultra light rod for perch or panfish. I do not know of a practical use for slow action rods in striper fishing.

On the other hand, I very frequently use a rod with medium action. Medium action rods are normally fairly rigid on the butt end, but taper quickly so there is a lot of wobble in the tip. This is my go-to rod for top-water fishing. A medium action rod used in association with a walk-the-dog lure is absolutely deadly for surface feeding rockfish.

Fast action rods are more useful for jigging. They’re also strong in the butt but still provide some flexibility at the tip, just not as much as medium rods. Most off-the-rack rods in the tackle shops have some degree of fast action -　in my opinion, the faster the better.

Rod action classifications vary with manufacturers, so it’s best to try before you buy. My favorite rods for jigging have extra-fast action. You wont find many inexpensive rods with this kind of taper. Depending on the manufacturer there may be some flexibility at the rod tip, but there isn’t much. These are usually the most sensitive rods because they require high-grade materials to achieve the extra-fast snap. If I can find a six-foot to six-foot-eight inch rod with true extra-fast action, I know I have a winner.

Power

The power of the rod refers directly to the weight of the lure or line you plan to use, and the weight of the fish you hope to catch. Power ranges from ultra-light to ultra-heavy and there are multiple combinations in-between. Power is usually categorized by lure & line weight and is listed on the shank of the rod. While some manufacturers will not warranty a rod that is used with line or lures outside the specifications, the better ones will. I look at power specs as nothing more than a gauge to tell me the thickness and strength of the rod.

Power is very much a personal choice. Some anglers use heavier rods for stripers because they feel it’s important to get them to the boat quickly. To me, a rod that is too heavy defeats the purpose of light tackle fishing. I use medium or medium heavy rods exclusively and it’s never taken me more than a few minutes to land a striper. I recently landed a forty-five pounder in less than three minutes with a medium power rod using ten-pound-test line.

Simply put, lighter rods are more sensitive to strikes. Fishermen sometimes worry that a lighter rod might break with a big fish. This is rare. I’ve never snapped a quality rod on a fish. Sometimes rods get damaged in other ways, and the injury becomes apparent when fighting a fish.

All rods will break. Maybe it’s possible to design one that won’t, but I’m not sure I’d want to fish with it.　 Sometimes rods are broken by poor technique. The right method for fighting a big fish is to set the hook then point the rod directly at the fish.　 This allows the reel’s drag to take over and takes stress off the rod.

A word about line guides

Line guides are frequently overlooked but they are also important when selecting a rod. First of all the guides should be lined up straight. This should be the first thing you check when you take a rod down off the rack. Sight down the rod to make sure none of the guides are out of synch with the others. The exception is specialty rods that intentionally spiral the guides.

High quality lightweight guides can add sensitivity to a rod. Guides are usually either double-foot or single foot depending on how they are attached to the rod. On the lower end, most are stainless steel with a ceramic center. The quality of the ceramic can vary greatly from rod to rod. Generally, guides with harder ceramics are more expensive.

Many high-end rods have “Fuji” guides. These guides have been carefully researched and are made of very good materials ranging from high-polished ceramics to aluminum oxide to even pure gold. Poorly made guides will rust quickly or become grooved when using braided lines. Never use guides made of plain steel for saltwater applications. They will just rust and cut your line.

I prefer that the tip guide on my rods be made of rust-proof metal instead off ceramic. I frequently find myself reeling my leader knots though the tip, or sometimes even pulling a metal lure up tight to the guide. Eliminating ceramic from the tip keeps me from getting line-cutting cracks and breaks in the guide.

Design

Fishermen will banter for hours about the virtues of a casting rod over a spinning rod or vice versa. It can be a “chicken or the egg” argument. I prefer a casting rod because that’s what I’ve always used, but I’ve fished with many good fishermen who use spinning outfits.

For beginners to intermediate fishermen, I suggest a spinning rod. The learning curve is not nearly so steep. Baitcasters offer an advantage when bottom jigging waters with rapidly changing depths, and take less energy to cast. But, spinning outfits can be better suited for suspended fish and are easier to use.

One thing I insist upon in a jigging rod is that the rod blank be cut out or exposed beneath the reel seat. An exposed blank allows my fingers to always be in contact with the rod, not the reel or the cork handle. I also prefer as little cork as possible anywhere on the rod. This includes the area immediately in front of the reel and farther back on the handle. This is not so important with a top-water outfit but when jigging, why in the world would anyone want to insulate the handle?

Materials

When I first started fishing, all my rods were fiberglass. My dad once let me use one of his custom rods made of wrapped leather. It was surprisingly sensitive. Most rods these days are made of graphite composites. Don’t stress out over the different designations manufacturers give graphite rods. Terms such as IM6, IM7, Modulus, etc. don’t mean a thing when comparing rods made by different manufacturers. There is currently no industry standard when defining the materials that go into a rod. Even the term “graphite” is subjective. The best rods are composites made from layers of true carbon graphite and other materials. The better rod builders closely guard the secret ingredients that make up their rods.

Custom Rods

There are some custom rod makers that turn out excellent rods. Some are absolutely beautiful with intricate designs and personalized detail. The advantage of a custom rod is that it can be designed to your exact specifications. I wouldn’t discourage anyone from investing in a quality custom made rod, but remember, just because a rod is “custom made” doesn’t mean it’s high quality. Materials can vary greatly between rod makers and you usually get what you pay for. Some custom rod makers use very cheap handles, guides, and other materials, while others use nothing but the best stuff on the market. As with all fishing equipment, let the buyer beware. Check things out carefully and talk to people you respect before investing hundreds of dollars in any rod.

If you’re　considering an investment in a custom rod, I　think it’s wise to experiment with off-the-rack rods for a while so you know exactly how you want one built. You’ll also want to talk to the rod builder to make sure they understand exactly how you fish and what you are looking for.

I have some custom rods that I dearly love, but I don’t always use custom rods mostly out of respect to the rod builders. I’m hard on rods. Real hard. I frequently break tips, wear out guides, handles, etc. I don’t mind sending an abused rod back to a national chain or major manufacturer, but after a year or two, I feel like I’m taking advantage of a struggling independent rod builder when I keep asking him to repair a lifetime warranty rod.

Freshwater vs Saltwater

At the core of the concept of light tackle fishing is the use of rods designed for large and smallmouth bass for stripers. Unfortunately, very few manufacturers design rods for our kind of fishing. The industry hasn’t caught up with the fact that we use lighter equipment for bigger fish in the open waters of the Bay than we do in the heavy cover of freshwater lakes and rivers. Rods classified as “inshore” are usually way too heavy for stripers.

The biggest problem light tackle Chesapeake Bay fishermen encounter is durability. 　The components on a freshwater rod rust, break, or wear out quickly when they’re constantly exposed to harsh saltwater conditions. Before buying a rod, check the warranty carefully and hold on to your receipts. 　You will need them.

My choices

Over time, you will develop your own personal rod preference that fits your individual fishing style. If you frequently change the type of rod you use you will always find yourself making mental adjustments because of the varying sensitivities. I think it’s best to settle on one style and stick with it.

The only time I consider a rod with more than one section is for traveling. One-piece rods are more sensitive because the flow of energy though the graphite is uninterrupted. My light tackle method consists of three primary one-piece rod types. All the rods I use for striped bass fishing are variations on these three styles.

For casting top-water plugs I use a six-foot six-inch or seven-foot medium action rod with medium heavy power. This rod gives me enough leverage for long casts and is stiff enough at the butt to handle big fish. It provides lots of flex in the mid-section and tip so I can really get it moving and put lots of action in the lure.

For jigging lightly weighted jigs up to one ounce I use a six-foot to six-foot six-inch fast action, medium power rod. This rod is light enough so that I can feel the jig well, but not so heavy that it wears me out casting it. The fast tip provides plenty of sensitivity.

For jigging one to two ounce jigs, I use a six-foot six-inch to six-foot-eight inch medium power rod with extra fast action. These are my most frequently used rods in the Chesapeake Bay. They’re also my most expensive and most sensitive rods.

I don’t usually put a lot of emphasis on casting distance when selecting jigging rods. It’s rare that I ever have the need to cast over fifty yards when I’m using jigs. Most of my casts are short wrist flips targeted toward where I think the fish might be.

There are rare instances when I might use seven-foot or longer rods. 　This is usually in situations when I need to cast spoons, top-water plugs, or slashbaits for long distances. 　A good example is spring on the Susquehanna Flats.

I insist that all my rods weigh as little as possible. Even my heavier rods weigh less than five ounces. Because of the importance I put on weight, I don’t like a lot of added lacquer or other bells and whistles.　Lighter rods paired with high-quality lightweight reels make casting less strenuous, provide added sensitivity, and reduce fatigue. I was recently fishing with a very good angler who asked how I kept from getting tired after hours of non-stop jigging using two-ounce heads. I handed him my outfit and his mouth dropped open before he said, “Two of your rods don’t weigh as much as one of mine!”

Good luck picking out the perfect rod! Remember, start with relatively inexpensive equipment until you refine your techniques and know exactly what you like. One you’ve figured out your favorites, stay with them.